7X18 Golf rangefinder, electronic range finder, monocular rangefinder Ranging Telescope, golf mirrors

1 feature This is a precision optics and digital technology to measure distances golf observe instrument, this is a very safe distance measuring device, there is no safe form of energy radiation, in the distance measuring activities on the human body without any damage and destruction. 2 two functions 1) .GREEN MODE (lawn function) This function is especially designed for the golfer, you can easily get the distance between your hole. 2) .GENERAL MODE (general function) This function is suitable for ordinary circumstances, you first enter the height of the object in, you can measure the distance between you and the target. 3 Part Names 1) Switch / adjustment button 2) The function keys 3) The battery is loaded cast parts 4). Peephole 5) The objective lens Main parameters: Objective lens: 28mm; Eyepiece: 16mm; Resolution: 13 “; Magnification: 7 times; Farthest test distance: 930 yards (one yard = 0.914 meters) Angle: 7.8 °; Power supply: two button batteries cr2032 Volume: 90mm × 50mm × 38mm; 4 Use 1) Press the switch / adjust key instrument to start, Ann will go directly to the lawn function. 2) for use in playing golf: in yards of scale height (2.6 yards) is already entered in the. (1) the bottom line of the screen and lawn horizontal alignment. (2) Press the switch / button to adjust the position of the scanning lines of the top golf transferred up the flagpole. (3) the number will be at the top of the screen, suggesting that the distance between you and the hole. 3) Use the special target for distance measurement when you press the function key to enter the general functional status of the instrument, the screen will display a three-digit number and one decimal place. If you want to check with your target object (1) Press the switch / adjust key input general functional status, the screen will display a three-digit number and one decimal place. (2) Press the function key to move to the tens digit, then press the switch / adjust key to enter numbers, the range is 0-9. (3) Repeat the above steps, you set the number and decimal digits. (4) Press the function key to end above the input process. (5) according to the height you enter, the screen will display the minimum distance that you can measure. (6) the lowest line the bottom of the screen and the target alignment. (7) Press the switch / button to adjust the position of the scanning lines transferred up to the top target. (8) digital will appear at the top of the screen, suggesting that the distance between you and the target. Please enter the height of it. 5 Notes 1) The distance and height of the display units have been entered is the same. 2) The operation ended after 60 seconds Auto power off. 3). Note! Do not use this product visually observe the sun, this will cause damage to the eyes